APsytems ECU-3 V8.0 Installation/User Manual 13 13
USING THE ECU MENU BUTTON
Figure 14
Figure 15
You can access the ECU’s menu by pressing and holding the Menu Button
on the side of the ECU for 2 seconds.
NOTE: The Menu Button will only cycle through its menu selections once
the ECU has been successfully initialized.
The ECU has the following menu structure (displayed on LED screen):
Press and hold the MENU Button, releasing the button to gain access to
the functionality of each menu item.
Exit Menu:
Returns the ECU to the normal operating screen (see Operating Interface
Pg. 11).
MENU Button
To Next Page
Loading...