APsytems ECU-3 V8.0 Installation/User Manual 34 34
REMOTE ECU MANAGEMENT
The ECU has been design with remote connect functionality. You
can access this remote functionality through the APsystems Energy
Monitoring & Analysis [EMA] website, using your installer login
credentials. Changes made remotely through the EMA do not take affect
until the ECU’s next reporting cycle.
The ECU must rst be installed with veried Power Line Communication
[PLC] and Internet connectivity.
The ECU remote functionality allows you to do the following:
1. Set Time Zones
2. Manage Inverter UIDs
There are additional ECU functions available but the instructions
are not outlined in this document. If you need to access one of the
following features, please contact APsystems Technical Support at
844-666-7034 or support@APsystems.com.
3. Change system parameters
4. Turn the inverters ON and OFF
5. Reset GFDI
6. Reset Power Settings
To Next Page
Loading...