APsytems ECU-3 V8.0 Installation/User Manual 36 36
REMOTE ECU MANAGEMENT
ECU CONFIGURATION
The ECU SETTINGS page is your entry point into managing ECUs
remotely.
The ECU SETTING tab allows you to:
Set Time Zones
• The ECU time zone can set or adjusted remotely through the ECU
Setting tab. If the time zone is not properly set the solar production
data will not post properly on the EMA site.
Load Inverter UIDs
• Once the ECU has been installed you can access the ECU remotely
to add the inverter UIDs. The ECU will not be able to collect data
from the inverters until the inverter UIDs are loaded,.
Update Inverter UID list
• The ECU’s programmed list of inverters will need to be updated if
an inverter(s) is added or swapped for a new unit.
ECU SETTING
Figure 44
To Next Page
Loading...