APsytems ECU-3 V8.0 Installation/User Manual 14 14
USING THE ECU MENU BUTTON
Figure 16
Figure 17
Status:
Reports both the number of inverters that should be reporting into the
ECU (Total), and the number that are actually reporting (Connected).
These numbers should match.
The Signal Level screen.
Turn off all:
Shuts down the entire system.
The Shutdown screen.
NOTE: Leaving the MENU Button untouched for one (1) minute returns
the ECU to the normal operating screen (see Operating Interface Pg. 11).
To Next Page
Loading...