APsystems ECU-3 - Page 40

APsytems ECU-3 V8.0 Installation/User Manual 40 40
REMOTE ECU MANAGEMENT
Uploading New Inverter UIDs into an Existing System
1. Select “Add” in Operation Selection.
2. Select “Input the Special Ones” in Inverter Selection.
3. Enter the 12-digit inverter UID into the blank eld area. The UID
is automatically placed in the Inverter ID column.
4. Press “Send”.
Delete UIDs from Inverter List
1. Select “Delete” in Operation Selection.
2. Select “Input the Special Ones” in Inverter Selection.
3. Select (check box) the inverter UIDs you want to delete from the
system in the “Operation select” column.
4. Press “Send”.