12
4.7 Final Assembly
After connecting all wirings, re-connect three cables and then put bottom cover back by screwing two screws
as shown below.
4.8 RS232/USB Communication Connection
Please download software “SolarPower” from the official website. When the inverter is connected to the
computer, the following interface will be displayed.
Note: The following dates are for reference only.
4.9 Wi-Fi Connection
(
Optional
)
1. The device has its own standard WIFI port, if users need to monitor the status and information of the device
through WIFI, they must connect to the WIFI collector.
2. Users can download”SmartEss” WIFI monitoring software from the app store on their phone.
3. Inverters come equipped with factory-integrated Wi-Fi capability which makes it very easy to integrate into a
home network (Wi-Fi Dongle is Optional) this makes it ideal for local monitoring via the inverter’s own wireless
home network or for online monitoring platforms
.
To Next Page
Loading...
