Introduction
Sidus One is an Aputure lighting control accessory which accepts and converts wired and wireless lighting
protocols. Wi-Fi Art-Net/sACN, Hardline DMX, CRMX, CRMX BT, and Sidus BT are all available for use
with the Sidus One.
So what can it do?
Wi-Fi: Using a mobile device with a compatible DMX control APP or a Lighting Console that can
connect to wireless networks, users can send Art-Net or sACN over Wi-Fi to the Sidus One; Sidus One can
convert and output one universe of DMX data via the wired DMX adapter or via (TX) CRMX Wireless
DMX.
1. Art-Net/sACN over Wi-Fi IN to CRMX Transmitter OUT.
2. Art-Net/sACN over Wi-Fi IN to Wired DMX OUT.
DMX IN/OUT and CRMX TX/RX: Sidus One can accept wired DMX signal from DMX consoles, and trans-
mit wirelessly via CRMX to control CRMX capable devices.
1. Wired DMX IN to CRMX Transmitter OUT.
2. CRMX Receiver IN to Wired DMX OUT.
CRMX BT: Compatible Apps can connect to Sidus One via CRMX BT and transmit CRMX and hardline
DMX 512 data.
1. CRMX Bluetooth IN to CRMX Transmitter OUT
2. CRMX Bluetooth IN to Wired DMX Out
Sidus BT: When Sidus One is set as the Master Node in the Sidus Link App, it provides enhanced stability
of the Sidus Mesh network and improves the reliability of a Sidus Link setup.
1. Sidus BT Master Node to Sidus BT Compatible Fixtures
(The different application scenarios for Sidus One are described in detail starting on page 12.)
04
ID
Number
Indicator
Light
Function
CRMX Status
Off
Unlinked from TX（RX Mode）
No Data （TX Mode）
Linked but no Data（RX Mode）
Unlink all Receivers（TX Mode）
Sending Link Signal（TX Mode）
Linking to TX or Linked but no TX
Found（RX Mode）
Solid
Slow Flash
Normal Flash
Fast Flash
Description
LED Status
1
CRMX
2
Art-Net/sACN
Wi-Fi Status
Off
On
No Art-Net or sACN signal found
Or Wi-Fi is Off
Wi-Fi is detected Receiving Data
Transmitting Data（TX Mode）
Linked to TX and Receiving
Data（RX Mode）
To Next Page
Loading...
