Aputure STORM 1200x - Sidus BT Settings

19
(1) Turn Sidus BT ON or OFF in the Sidus BT settings.
2.3.3 Sidus BT Settings
a. Signal Strength: When DMX data is provided to the Control Box acting as an RX , the
DMX Status Screen will indicate the CRMX signal strength the Control Box is receiving.
b. CRMX Signal is good and DMX data is present.
d. The Control Box CRMX RX is out of range of its TX. Check that the TX is powered On and
within range.
CRMX
CRMX
CRMX
CRMX
(5) CRMX RX (Receiving) Status
Signal Strength
c. No DMX data present.
CRMX
CRMX
CRMX
CRMX
DMX
Address
001
DMX
D
M
X
Output:
Constant
Driver：
HyperSync
DMX
Address
001
CRMX
D
M
X
Output:
Constant
Driver：
HyperSync
P11 - CCT & RGB-8Bit (10 C
DMX
Address
001
D
M
X
Output:
Constant
Driver：
HyperSync
DMX
Address
001
CRMX
D
M
X
Output:
Constant
Driver：
HyperSync
P11 - CCT & RGB-8Bit (10 C
DMX
Address
001
D
M
X
Output:
Constant
NO Date
P11 - CCT & RGB-8Bit (10 C
DMX
Address
001
P11 - CCT & RGB-8Bit (10 C
CRMX
D
M
X
Output:
Constant
Driver：
HyperSync