EasyManuals Logo

Aqua Computer aquaero 5 User Manual

Aqua Computer aquaero 5
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
AQUAERO 5 / AQUAERO 6
Pin assignment: Pin 1: GND
Pin 2: 5 V
Pin 3: Speed signal
Compatible flow sensors:
Flow sensor with 5.6 mm nozzle (53061)
Flow sensor “high flow” (53068)
Connection cable for flow sensor (53027, 53100)
4.11.
4.11.4.11.
4.11. Connector “RGB LED”
Connector “RGB LED”Connector “RGB LED”
Connector “RGB LED”
Connector for up to three LEDs or one two-color or RGB illumination module (not
included in delivery). High brightness LEDs (2-3.2 V, 20 mA) may be connected
without series resistor, a series resistor is built into the aquaero.
Pin assignment: Pin 1: VCC LED 1 (red, for 2.1 V forward voltage)
Pin 2: VCC LED 2 (green, for 3.2 V forward voltage)
Pin 3: GND
Pin 4: VCC LED 3 (blue, for 3.2 V forward voltage)
Compatible products:
RGB illumination module (34930)
4.12.
4.12.4.12.
4.12. Connector “Relay”
Connector “Relay”Connector “Relay”
Connector “Relay”
Floating contact (changeover contact). May be used for emergency shutdown of
the PC which requires additional accessories (art. no. 53047 and 53080, not in-
cluded in delivery) or for free use. Maximum contact rating 1 A, 12 V.
Pin assignment aquaero 5: Pin 1: normally open
Pin 2: normally connected
Pin 3: common connector
Pin assignment aquaero 6: Pin 1: normally connected
Pin 2: normally open
Pin 3: common connector
Compatible products:
Plug for relay connector, 3 contacts (53080)
aquaero power connect - 24 pin ATX standby power / ATX break (53047)
4.13.
4.13.4.13.
4.13. Connector
ConnectorConnector
Connector “Standby” (aquaero 5 only)
“Standby” (aquaero 5 only) “Standby” (aquaero 5 only)
“Standby” (aquaero 5 only)
Connector for additional power supply from the 5 Volts standby power line of the
power supply unit. If connected to standby power, the aquaero 5 will remain func-
tional while the computer is in soft off state even if no USB standby power is sup-
plied. For use with Aqua Computer article number 53047 only (not included in
delivery)!
Pin assignment: Pin 1: GND
Pin 2: +5 V Standby
Compatible products:
© 2014-2019 Aqua Computer GmbH & Co. KG - 11 -
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aqua Computer aquaero 5 and is the answer not in the manual?

Aqua Computer aquaero 5 Specifications

General IconGeneral
BrandAqua Computer
Modelaquaero 5
CategoryController
LanguageEnglish

Related product manuals