Dual exposed shower with fixed and adjustable shower heads installation instuctions page 10
Ensuring the hose is in the correct position,
offer the hose onto the handset. Push the
handset onto the hose to lock the anti kink
swivel connector and secure the handset to
the hose. Once tightened carefully pull the
handset away from the hose to release the
integral anti kink swivel connection. Place
the handset into the handset holder.
16
The tension of the handset station to the handset holder is factory set.
However, it may be necessary, especially for showers fitted to high pressure
systems, to tighten the tension as required. Tighten the screw inside the
handset station taking care not to overtighten.
!
To Next Page
