Dual exposed shower with fixed and adjustable shower heads installation instuctions page 7
Ensuring the washers are positioned within the
valve inlets, offer the valve into position.
Tighten the fixing nuts using a suitable tool
taking care not to overtighten.
8
Place the cover plates onto the exposed ¾” threads, flush with the finished wall
surface and apply a thin bead of mastic if required.
5
Remove the grub screws from the valve control knob levers and set aside.
6
Secure the grub screws to the valve control
knobs using the hexagonal key provided and fix
the levers to the control knob assemblies.
7
Ensuring the sealing washer is in position,
secure the top outlet valve connector to the
valve and tighten using a suitable tool,
taking care not to overtighten.
9
Ensuring the handset cradle is on the left
hand side of the rail, pass the rail through the
handset holder whilst keeping the slider button
depressed.
1
Fixed & adjustable height head assembly
Remove the cover plate and pass the straight riser tube through the wall
fixing bracket.
2
To Next Page
Loading...
