10-02-2020 Page 17 of 32 ARB Copyright 2017 3789736
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
4.10) Apply masking tape to the vehicle’s tailgate level with
the door’s lower glass edge.
4.11) Starting at the edge of the tailgate, roll out the clear
protection tape (665037) and start partially by removing
the tape backing liner as small section at a time.
4.12) Push out bubbles and wrinkles as the tape is being laid
down, working from one end of the tape with a
squeegee.
Trim the clear tape at the end level with the end of the
tailgate.
Remove the masking tape at completion.
To Next Page
Loading...
