ARCCAPTAIN 55 Pro - Fire Safety; Fumes and Gases Safety; Arc Rays and Noice Safety

2
1.3 Fire Safety
! WARINING BEWARE OF FIRE HAZARD!
 Place the machine on non-combustible surfaces to prevent fires.
 Ensure no flammable materials are near the working area to reduce fire risk.
 Avoid installing the machine near water sources to prevent water damage.
 Always weld/cut materials in a dry environment with humidity below 90% and
maintain a working temperature between -10°C and 40°C.
 When welding/cutting outdoors, ensure shelter from sunlight and rain, keeping
the machine dry at all times.
 Do not operate the machine in dusty or chemically corrosive environments.
 Remove or secure all combustible materials within a 35 feet (10 meters) radius of
the work area. Use fire-resistant material to cover or seal open doorways,
windows, cracks, and other openings.
 Improper use can lead to fire or explosion. Avoid flammable materials near the
working area, keep a fire extinguisher nearby with trained personnel, refrain from
cutting closed containers, and do not use the machine for pipe thawing.
1.4 Fumes and Gases Safety
! WARINING SMOKE CAN BE HARMFUL TO YOUR HEALTH!
 Keep your head away from the smoke while cutting to avoid breathing in harmful
gases.
 Ensure the working area is well-ventilated with exhaust or ventilation equipment
during cutting.
 Only work in a confined area if it's well-ventilated, or wear an air-supplied
respirator.
1.5 Arc Rays and Noice Safety
! WARINING
 Arc radiation can harm eyes and skin; excessive noise can damage hearing.
 Use certified cutting eye protection with at least a number 10 shade lens rating.
 Wear leather leggings and fire-resistant shoes or boots; avoid clothing that can
catch sparks or molten metal. Do not touch hot workpiece with bare hands.
 Keep clothing free of flammable substances and wear dry, insulating gloves and
protective clothing.
 Wear an approved head covering and use appropriate cutting attire.
 When cutting overhead or in confined spaces, use flame-resistant ear plugs or
ear muffs.
 Wear ear covers or other hearing protectors when cutting.
EXCESSIVE NOISE DOES GREAT HARM TO HEARING!
ARC RADIATION MAY HURT YOUR EYES AND BURN YOUR SKIN！