Dishwasher / User’s Manual
15 / 48
EN
Preparation
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level
1 1 2 3 4 5
If the hardness level of the supply
water is above 90 °dF or if you
are using well water, then it is
recommended to use water purification
devices and special filters.
If the hardness level of the supply
water is below 13°dF, there is no need
to use salt in your dishwasher. If this is
the case, “No Salt Warning Indicator”
(if any) illuminates continuously on the
panel of your machine.
If the water hardness level adjustment
is set to level 1, the “No salt warning
indicator” will illuminate continuously
although it is not necessary to use salt.
If you use salt under this condition,
salt will not be consumed and the Salt
indicator will not illuminate.
C
If you move your house,
it is necessary to readjust
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.
To Next Page
Loading...
