arcelik K60365 - Changing The Door Opening Direction

18
4.11 Changing The Door Opening Direction
Necessary parts for changing the door direction (door left kit group) are placed in a plastic
bag in the refrigerator.
Screw on the cover of upper hinge is removed with Phillips screwdriver (See 4.1). Then,
right and left hinge covers are removed with the help of a pointed tool. (in case of any deformation,
spare hinge cover is provided within left kit group of the door)
Cable group located in the door hand plate is pulled to remove and sockets are disconnected
(models with display).
Two screws holding the hand plate on the door is removed with the help of a Phillips
screwdriver.
Contents of the Package:
-Upper door stopper
1
Name
-Lower hinge bearing of fridge door
1
Name
-Middle section plug
1
Name
-Handle hole plug
2
Name
-Hinge cover on the door hand plate
1
Name
-Hand plate cover on the body (hinge side)
1
Name
-Hand plate cover on the body
1
Name