arcelik K60365 - Electronic Control Board; EK3 CARD

38
10.17 Electronic Control Board
The control board is placed in the plastic box towards the rear wall on the upper plate of the
refrigerator.
Connectors:
KN1 : 1 : Phase
KN1 : 2 :Neutral
KN1 : 3 : Compressor
KN1 : 4 : Defrost heater
KN2 : 1 : FF heater
KN2 : 2 : Frz Fan motor
KN2 : 3 : FF Fan motor
KN2 : 4 : Ionizer
KN2 : 5 : Illumination
KN3: Sensor Socket
KN4: Display socket
10.18 EK3 CARD
In addition to control card, it is used for driving 12VDC illumination with 12VDC FF fan
(Square) located on the fridge.