Arcom RC-210 User Manual

58 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Page #2 background image

Loading...

Page #2 background image

2

(This page intentionally left blank)

Table of Contents

Table of Contents3
Command Reference6
Command Structure6
Default Commands Accessible When Unlocked7
- Receiver Enable/Disable7
- Transmitter Enable/Disable7
- Carrier/Ctcss Access7
- Touchtone© Covertone7
- Courtesy Tone Selection7
- Kerchunk Filtering7
- Half/Full Duplex Operation8
- Port 3 for Control Receiver8
- Monitoring a Port from Other Ports8
- Linking Ports Quickly9
- MIX Monitored Audio with this Port RX Audio9
Mute DTMF ON/OFF9
- Speech Override ON/OFF9
- Speech ID Override ON/OFF9
- Enable/Disable Port DTMF9
- Require/Not Require CTCSS for DTMF10
- Auxiliary Audio Inputs10
- General Logic Outputs10
- Extended Logic Outputs10
- Aborting ID's on DTMF11
- Remote Base Operation11
- Using the Doug Hall RBI-1 Remote Base Interface12
- Remote Base Power Select12
- Memory Select12
- Command Macros13
- Message Macros13
- ID Extras13
- Custom Command Prefix13
- Meter Alarms14
- Real Time Clock and Calendar14
Programming the Rc-21015
General Programming Overview15
- Unlock Code Programming15
- Locking (Leaving Program Mode)16
- Programming a Custom Lock Code16
- Programming a Custom Terminator Digit16
- A Word of Caution Regarding the Terminator Digit16
Port Unique Versus Global Programming17
- Port Unique Programming17
- Timer Programming17
- Hang Time17
- Time out Timer17
- Initial ID Timer17
- Pending ID Timer17
- Fan Timer18
- Port Inactivity Timer18
- DTMF Mute Timer18
- CTCSS Encode Dropout Timer18
- Alarm Timers18
- Auxiliary Audio Timers19
- Alarm Debounce Timer19
- Kerchunk Filter Timer19
- Pending ID Speech Timer19
- Periodic Message Timer19
- CTCSS Encode Control Line Polarity19
- Setting the Real Time Clock and Calendar20
- Year Readback20
- Adding a Correction Factor to the Real Time Clock20
- Remote Base Programming21
- Remote Base Prefix21
Programming the RC-210 Command Macros22
- Command Macros22
- Using Command Macros to Remap Controller Functions23
- Command Macro Priority23
- Message Macros24
- Tail Messages24
- Some Practical Examples of Tail Message Programming25
- Speech Control Within Command Macros26
- List of Port Direction Commands for Use in Macros27
- Controlling Command Macro Access by Port27
- Erasing All Command Macros27
- Erasing Command Macros27
- Startup Macro27
Special Features28
- Temporarily Disabling ID's and Timeout Timer28
DTMF Memories28
- DTMF Digits Duration and Time between Digits28
- Macro Function Number List29
- Macro Function Number List (Continued)30
- Macro Function Number List (Continued)31
The Scheduler32
- How Do We Define Setpoints32
- Recurring Voice Messages32
- Plan! Plan! Plan33
- Erasing Setpoints34
- Voice Message Editing and Ids34
ID Extras34
- Enable/Disable Voice Ids34
- Using the Digital Voice Recorder (DVR)35
- Recording DVR Tracks35
- Playing a Recorded DVR Track35
- Erasing Tracks35
- Editing Recorded Tracks35
- Finding out How Much Recording Time You Have Left36
- Auxiliary Audio Inputs36
- Resetting the RC-21036
- CW Speed Programming37
- CW Tone Programming37
- CW Message Programming37
- Courtesy Tone Programming38
- Courtesy Tone Behavior When Ports Are Linked39
- Programming Meter Faces - 10-Bit A/D Converters40
- Programming Meter Alarms41
- A Practical Example41
- The Differences between Accuracy and Precision42
- Programming the Reference Voltage Value for the A/D Converters42
- Measuring Voltages Higher than Vref - a Practical Example43
- Alarm Programming44
- Using Auxiliary Audio Inputs with an Alarm44
- Using Auxiliary Audio Inputs with a Macro44
- Alarm Timers44
- Resetting the Unlock Codes44
Updating the Firmware45
- Downloading and Installing the Required Software on Your Computer45
Programming Cable45
Downloading Firmware Updates45
- Frequency Agile Radios Supported (Firmware Version 4.1)50
- Factory Default Programming Values50
Appendix A50
- CTCSS Codes51
Appendix B51
- Default Factory Command Codes52
Appendix C52
- Programming Commands Quick Reference53
Vocabulary List54
Audio Spectrum Analyzer Software57
The RC-210 Development and Testing Team57
Arcom Communications No-Nonsense License Agreement for the Operating Firmware of the Rc-210 Repeater Controller58

Questions and Answers:

Need help?

Do you have a question about the Arcom RC-210 and is the answer not in the manual?

Arcom RC-210 Specifications

General

Brand	Arcom
Model	RC-210
Category	Controller
Language	English

Related product manuals

Preview: Arcom RC210