Arcom RC-210 - Macro Function Number List (Continued)

31
Macro Function Number List
(continued)
FN Description
FN Description
242 Speech ID Override OFF Port 1 288 Enable Meter 1 Alarm
243 Speech ID Override OFF Port 2 289 Enable Meter 2 Alarm
244 Speech ID Override OFF Port 3 290 Enable Meter 3 Alarm
245 Speech ID Override ON Port 1 291 Enable Meter 4 Alarm
246 Speech ID Override ON Port 2 292 Enable Meter 5 Alarm
247 Speech ID Override ON Port 3 293 Enable Meter 6 Alarm
248 All Courtesy Tones OFF Port 1 294 Enable Meter 7 Alarm
249 All Courtesy Tones OFF Port 2 295 Enable Meter 8 Alarm
250 All Courtesy Tones OFF Port 3 296 Disable Meter 1 Alarm
251 Force Audio To Entered Port 297 Disable Meter 2 Alarm
252 Stop ID/Disable Timeout Timer Port 1 298 Disable Meter 3 Alarm
253 Stop ID/Disable Timeout Timer Port 2 299 Disable Meter 4 Alarm
254 Stop ID/Disable Timeout Timer Port 3 300 Disable Meter 5 Alarm
256 Resume ID/Enable Timeout Timer Port 1 301 Disable Meter 6 Alarm
257 Resume ID/Enable Timeout Timer Port 2 302 Disable Meter 7 Alarm
258 Resume ID/Enable Timeout Timer Port 3 303 Disable Meter 8 Alarm
259 Send DTMF Memory 1 304 Disable DTMF Aborts ID
260 Send DTMF Memory 2 305 Enable DTMF Aborts ID
261 Send DTMF Memory 3 306 Not Used
262 Send DTMF Memory 4 307 Not Used
263 Send DTMF Memory 5 308 Not Used
264 Send DTMF Memory 6 309 Bump Clock By Correction Factor
265 Send DTMF Memory 7 310 Say year as part of date
266 Send DTMF Memory 8 311 Don't say year as part of date
267 Send DTMF Memory 9 312 Port 1 Tail Message OFF
268 Send DTMF Memory 10 313 Port 2 Tail Message OFF
269 Send DTMF Memory 11 314 Port 3 Tail Message OFF
270 Send DTMF Memory 12 315 Port 1 Tail Message 1
271 Send DTMF Memory 13 316 Port 2 Tail Message 1
272 Send DTMF Memory 14 317 Port 3 Tail Message 1
273 Send DTMF Memory 15 318 Port 1 Tail Message 2
274 Send DTMF Memory 16 319 Port 2 Tail Message 2
275 Send DTMF Memory 17 320 Port 3 Tail Message 2
276 Send DTMF Memory 18 321 Port 1 Tail Message 3
277 Send DTMF Memory 19 322 Port 2 Tail Message 3
278 Send DTMF Memory 20 323 Port 3 Tail Message 3
279 Clear All Meter Hi/Low Trippoints
280 Clear Meter 1 Hi/Low Trippoint
281 Clear Meter 2 Hi/Low Trippoint
282 Clear Meter 3 Hi/Low Trippoint
283 Clear Meter 4 Hi/Low Trippoint
284 Clear Meter 5 Hi/Low Trippoint
285 Clear Meter 6 Hi/Low Trippoint
286 Clear Meter 7 Hi/Low Trippoint
287 Clear Meter 8 Hi/Low Trippoint
351 - 370 Suspend Scheduler Setpoint 1 - 20
371 - 390 Resume Scheduler Setpoint 1- 20
401 - 490 Macro 1 - 90 (these codes can only be used inside another macro. It is not possible to recall them directly)