Arctic Spas Cub User Manual

Owners Manual - Expedition Class
19
Filtration System
The use of Clariers and Foam inhibitors is not recommended with dispos-
able lters!
Arctic Spas
®
are equipped with balanced ltration, meaning that the lter cartridges are sized to
meet the needs of the pump system. As with any water ltering system, the lter cartridge may become
clogged, resulting in reduced water ow. It is important to maintain a clean, unobstructed lter system. We
recommend that your lter cartridge be replaced with an Arctic Pure
®
disposable lter cartridge every three
(3) months.
Filter Cartridge Removal and Installation
1. Put the spa in Standby mode using the on/o󰀨 button on the topside control panel.
2. Remove the telescoping lter cylinder
3. Unscrew the lter cartridge and either clean the reusable lter or discard the disposable lter.
4. Re-thread the clean or new lter.
5. Slide the telescoping lter cylinder back into the lter bucket.
Care of Spa Pillows
The spa pillows used in many of the Arctic Spas
®
models will provide years of comfort if treated with care.
They have been positioned above the water level to minimize the bleaching e󰀨ects of chlorinated water and
other spa water chemicals. To extend their life, whenever the spa shell is being cleaned, the spa pillows
should be removed and cleaned. Body oils can be removed with a mild soap and water solution. ALWAYS
rinse o󰀨 the spa pillows thoroughly to remove any soap residue. The pillows can be conditioned with Arctic
Pure
®
Cover Renew cleaner after cleaning. If the spa is not going to be used for a long period of time (that
is, during a vacation or if the spa is being winterized), or when the spa water is being super-chlorinated, the
spa pillows should be removed until the next use of the spa.
To remove and replace the spa pillows:
1. Pull the pillow directly upwards until it is fully extended. Next to the acrylic of the shell, there
is a button that you press to allow you to pull the pillow upwards and out completely.
2. To reinstall the spa pillow, push the button and carefully insert pillow.
Care of the Spa Shell
Your Arctic Spa
®
has a berglass reinforced, Aristech
®
cast acrylic shell. Stains and dirt generally will not
adhere to your spa’s surface. A soft cloth or sponge should easily remove most dirt. Most household chemi-
cals are harmful to your spa’s shell. Sodium bicarbonate (baking soda) or vinegar can also be used for
minor surface cleaning. Always thoroughly rinse o󰀨 any spa shell cleaning agent with fresh water.
Service Notes:
1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Your
Arctic Spas
®
Dealer stocks Arctic Pure
®
Best Defence to use if your spa water has a high
concentration of dissolved minerals.
2. The use of alcohol or any household cleaners other than those listed to clean the spa shell
surface is NOT recommended. DO NOT use any cleaning products containing abrasives or
solvents since they may damage the shell surface. Damage to the shell by the use of harsh
chemicals is not covered under the warranty.

Arctic Spas Cub Specifications

General

Brand	Arctic Spas
Model	Cub
Category	Hot Tub
Language	English