Spa Boy Owners Manual
1.6 How Does Spa Boy Work?
• Consumer registers their spa on the My Arctic Spa web based after sales support system.
• Arctic Pure Natural Mineral Sea Salt Blend is added to the spas water when the spa has been filled with
water and water balanced.
• An ORP/pH probe is fixed into the foot well area of your spa, which sends a signal to the Spa Boy Generator and through the Spa Boy
Communication Cable connects to the Global Eco PAK. The Global Eco PAK can then establish a two-way communication channel between the
Global Eco PAK and myarcticspa.com
• Spa Boy data logs the spa water pH and ORP levels for the Technician to view..
•
Spa Boy automatically produces and maintains sanitizer (Chlorine) within the specified ORP range (545-550mV).
• Spa Boy displays current ORP and pH levels of your spa water within My Arctic Spa.
• As required the consumer adds the required amount of Arctic Pure Salt Water Balance to keep the pH within the required range.
1.6.1 Spa Boy System Interface
The following diagram reflects the Spa Boy System interface:
55
To Next Page
Loading...
Need help?
General
