To Next Page

To Previous Page

Is Sanitizer Being Produced and Delivered to Spa Water?

This test requires:

· The water temperature to be at least 80o F (27o C).

· The Filter Cycle Duration to be set to 00.

· Onzen Cycle Duration programmed to On 24. Onzen system will run for 24 hours per day.

Step 1. Set Filtration Cycle Time to Fd 00 (= No Filtration)

Press the Filter Cycle Key until SETT is displayed. The

Filter Cycle Duration details “Fd” will be displayed “Fd XX” .

Use down arrow key to change the Filter Cycle Duration to Fd 00.

This de-activates the ﬁltration pump so you can see the mist of gas

bubbles produced by the Onzen System.

Step 2. Scroll to On (Onzen Duration) Setting

Scroll through the settings by pressing the Filter Cycle

key until it reads “On X ”. (“x” will be a value

between 0 & 24).

Step 3. Change On Setting to On 24

Change On setting to On 24.

On 24 programs the Onzen system to produce sanitizer 24 hours

daily.

Step 4. Scroll Through Settings

Continue scrolling through the settings by repeatedly pushing the

Filter Cycle key until the pack resets.

1.11.7 Conducting a Sanitazer Production Test

Onzen Owners Manual

Arctic Spas Cub User Manual

Questions and Answers: