Arctic Spas Cub - Page 29

28
Owners Manual - Expedition Class
Start-up:
1. Add pucks to oating dispenser and open to setting 4.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of
water.
3. Add 1 tablespoon (14 grams) of Arctic Pure
®
Spa Boost per 1000 litres (265 gallons) of
water.
4. Test the Chlorine level. Once the chlorine reads within the ideal range (1-3 ppm) turn tablet
dispenser down to 1 - 2 (more or less according to bather load).
Weekly:
1. Add pucks to oating dispenser and reset the setting if necessary.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of
water.
Important: Arctic Pure
®
Refresh signicantly reduces pH and TA. One hour after adding Arctic
Pure
®
Refresh test and adjust TA and pH as needed.
Bromine System:
Note: If you are planning to use your new spa right away, Peak Boost must be added rst. Follow
directions for adding Peak Boost from this page.
1. Fill oating dispenser with pucks and open to setting 7.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of
water.
3. Add 2 1/2 tablespoons (35 grams) of Arctic Pure
®
Peak Boost per 1000 litres (265 gallons)
of water, to establish a Bromide reserve.
4. Test the Bromine level. Once bromine reads within the ideal range (3-5 ppm) turn tablet
dispenser down to 2 or 3 (more or less according to bather load).
Weekly
1. Twice a week test and adjust Total Alkalinity, pH and Bromine levels.
Important: Arctic Pure
®
Refresh signicantly reduces pH and TA. One hour after adding Arctic Pure
®
Refresh test and adjust TA and pH as needed.
The use of Clariers and Foam inhibitors is not recommended with Silver Sentinel
Disposable lters!
IMPORTANT: Chemical doses given in this manual are for reference ONLY. ALWAYS
refer to product label for instructions.