Question 13 Can I use softened water with my Spa Boy system?
Yes, you probbaly have a water softener because your water is quite hard. Your water-softener removes calcium from your water and
helps you achieve water with calcium content near the target range, between 50 - 150 ppm.
Question 14 Prior to draining spa water for refill purposes, should a system flush be carried out?
Yes you can, Arctic Pure ‘Fresh Start’. Use in accordance with the instructions on the container. Flushing the system components and
hoses is helpful when you get biofilm and calcium build-up.
It is good practice to do this at least once a year.
Question 15 If I am going to have a very heavy bather load, is there a way to manually active
the Spa Boy System to generate additional sanitizer (Increase ORP Level)?
Yes you can.
Pressing the Boost Button through the App or dashboard in myarcticspas.com will manually activate the Spa Boy System for 30
minutes. Boost button can be activated in such cases when you know you are going to have a heavy bather load.
CAUTION: Only press the Boost Button once.
When the Boost Button is pressed:
• The Lightening Bolt on the Boost Button will illuminate and then,
• The Spa Boy Generator will turn On and Off TWICE along with the Lightening Bolt, and then,
• The Boost function commences its 30-minute cycle. During this cycle the Lightening Bolt remains illuminated.
Pressing the Boost button more than once will cause the Boost function not to activate.
Spa Boy Owners Manual
1.15 Caring for your Spa Boy System
Spa Boy Maintenance
76
To Next Page
Loading...
Need help?
General
