ARDETEM PECA 30 - Resetting of Energies and Different Setting

PECA 30 / 30 E : Accessible functions during the measurement
41
ARDETEM
RESETTING OF ENERGIES AND DIFFERENT SETTING
• UTILIZATION :
This function is utilised to reset :
- all the energies meter,
- the peak values (currents or other on request),
- the running time meter,
- the measured parameters saving memory.
But also to :
- the energies meter to a value captured by keyboard,
- the date and the hour of the time meter for the measured parameters saving option.
• PROCEDURE :
measurement

Choice of the programming clearing mode

Capture of validation code : “3.333”


see p.42 see p.43

validation of the resetting (« YES »)

retour en mesure
conF
rEAd
CL
r
codE
3.333
CLr.H
CLr.E
CLr.C
hou
r
CLr.m
EnE
r
CL
r
Y
ES