7
4. Troubleshooting / Tips & Specifications
Brakes
Use only supplied Tektro brakes.
The frame is compatible with 140 mm disc rotors only.
Rear mount thickness is 10 mm. Use a M5 x 20mm mounting screw.
The fork is compatible with 140 mm disc rotors only.
Use a 27 mm mounting screw.
Tire Clearance
The biggest tires that can be installed are 700x28c, they must be no wider than
30 mm, for the front and rear wheels.
Seat Post
Argon 18 exclusive Aero Seatpost Shape, compatible with our other E-119
and E-117 SP.
Saddle Clamp
The saddle clamp is compatible with Ø 7mm saddle rails. If your saddle rails are not
round, please refer to the Ritchey’s part numbers listed below. These parts are not
sold by Argon 18, they are available on Ritchey’s website (ritcheylogic.com).
55055467004 for 7x7mm saddle rail
41055467003 for 8x8.5mm saddle rails
41055467002 for 7x9.6mm saddle rails
Front Mechanical Derailleur
The E-119 Tri Disc family is designed to work with full housing compatible front
derailleurs. The front derailleur must have an integrated cable stop.
Bottom Bracket
BB86 (press-fit)
Headset
Top bearing: MR136-1 1/4", 45° x 45° stainless steel
Bottom bearing: MR122-1 1/8", 36° x 45°
Chainring
The E-119 Tri Disc family is designed to work with round
and oval chainrings with 50 to 57 teeth and the equivalent max. OD of a 57T chainring.
Seat Post Collar
Argon18 exclusive, E-119Tri+ Disc seatpost clamp. The E-119 Tri+ Disc’s seat clamp is
NOT the same as the rim brake version on the Nitrogen, E-117 and E-119.
Disc brake rotor
The disc brake system is compatible with any 140mm disc on the market, although it's
optimized for the Tektro Disc. Argon 18 cannot guarantee optimal performance with
other disc brake rotor.
Disc brake pad
Use a Tektro F10RS compatible brake pad. Also compatible with Shimano
K02S/K04S pads.
Power Meter
The E-119 Tri Disc family is designed to work with the most of the power meters
available on the market.
For hub/wheel-based power meters:
The system must be compatible with a 12 mm X 142 mm OLD rear thru-axle.
For crank/chainring-spider-based power meters:
The E-119 Tri Disc frame has enough clearance to fit most models of Stages, Quarq,
Rotor, SRM, 4iiii, FSA PowerBox (Power2Max NG Eco), etc.
Please contact your local Argon 18 authorized retailer for confirmation
before purchasing.
Please contact customer service at info@argon18.com for any further inquiries.
Always clamp the bike by the
seatpost. Clamping it by any other
tube might damage the frame and
could cause an accident and/or injury.
To Next Page
Loading...
