38
Compact Printer Series - User’s Manual
opened.
Note:
When the print head is over-heated, printer’s
thermal protection function will be activated and
make READY LED blink to indicate printer is in
PAUSE status to wait till print head has been
cooled down. The printing tasks sent previously
will be resumed automatically later.
Press to advance the label media to the first
printing position.
Press during printing to make printer "pause".
Press and hold while switching on the power to
conduct media calibration and print out a
configuration profile.
To resume printing after “Media Out “or
“Ribbon Out “ errors have been resolved.
To Next Page
Loading...
