Ariston HOTPOINT - Cleaning the Outer Surfaces; Changing the Bulb

15
EN
Cleaning and
Maintenance
CLEANING THE OUTER SURFACES
To clean both the electronic programmer window and the oven
door, use a window cleaning product applied with a soft cloth.
Do not use abrasive creams or scouring pads.
Changing the bulb
- Turn the lamp glass a quarter turn to the left.
- Unscrew the bulb in the same direction.
Bulb specification:
- 15 W - 220 -240 V
- 300°C - E 14 cap
- Replace the bulb then reposition the lamp glass, making
sure the seals are correctly positioned.
- Reconnect the oven.
The bulb is located at the back right of your
oven’s cavity.
Disconnect the oven before accessing the bulb
to avoid any risk of electric shock.