CS175-275-575-875 Installation Guide 79
Communicator Code Location Number of Segments
End download
108 3
Locations 109 to 121
Reserved
Location 122 Account code for partition 1 (six segments, ND)
This location contains the account code sent when partition 1 is reported.
If this location is left unprogrammed (all 10s) the account code corresponding to the
phone number dialed is used.
If the account code is less than six digits, program ‘10’ in the segment immediately after
the last digit of the account code. If the account code is six digits long, program all six
segments.
Location 123 Account code for partition 2 (six segments, ND)
Location 124 Account code for partition 3 (six segments, ND)
Location 125 Account code for partition 4 (six segments, ND)
Location 126 Communicator format override
Segment 1 1
On: 1800 Hz transmit; Off: 1900 Hz transmit.
2
On: 2300 Hz handshake; Off: 1400 Hz handshake.
3
On: checksum parity; Off: double round parity.
4
On: SIA area modifier.
5
Allow phone number programming.
6
Sema digit.
7
On: 20 p.p.s.; Off 10 p.p.s.
8
On: handshake required.
Segment 2 1
On: pager format.
2
On: 1400/2300 handshake.
3
On: Fast Format 8 channel.
4
On: voice protocol.
5
On: Contact ID.
6
On: SIA.
7
On: Contact ID or 4+2.
To Next Page
Loading...
Need help?
General
