23
NOTE: “Lo” results are included as 20 mg/dL in the averages. “Hi”
results are included as 600 mg/dL in the averages. Test results with
the following symbol or flag are not part of the result average:
temperature error symbol, control solution flag, or delete flag.
Setting Test Average Display
Press the button to cycle through the test
averaging choices: “oFF” (not displayed),
“7” (7-day average), “14” (14-day average),
or“30” (30-day average).
If you select either 7-day, 14-day, or 30-day
averaging, your average test result will appear
when you recall results from memory. See
page 60.
After you set test averaging, press the
button to confirm the setting.
To Next Page
Loading...
