Arkray GLUCOCARD 01-mini User Manual

40
Performing a Blood Glucose Test
Step 1:
Remove test strip
from the bottle. Immediately
replace the bottle cap tightly.
Insert test strip as shown in
diagram. A beep will sound
and the meter will turn on
automatically. Verify that
all symbols appear on
the screen.
NOTE: Four and a half minutes after test strip insertion, a beep
sounds every 5 seconds. After 5 minutes, a beep sounds and the
meter turns off. Take out unused test strip and insert it again to turn
meter back on.

Arkray GLUCOCARD 01-mini Specifications

General

Brand	Arkray
Model	GLUCOCARD 01-mini
Category	Blood Glucose Meter
Language	English