Arkray GLUCOCARD 01-mini - When to Perform a Control Solution Test

26
Perform a Control Solution Test:
•BeforetestingwiththeGLUCOCARD™01-minibloodglucosemeter
for the first time.
•Whenyouopenanewbottleofteststrips.
•Wheneveryoususpectthemeterorteststripsmaynotbe  
functioning properly.
•Iftestresultsappeartobeabnormallyhighorloworarenot 
consistent with clinical symptoms.
•Theteststripbottlehasbeenleftopenorhasbeenexposedto 
temperatures below 34°F (1°C) or above 86°F (30°C), or humidity
levels above 80%.
•Tocheckyourtechnique.
•WhentheGLUCOCARD™01-minibloodglucosemeterhasbeen 
dropped or stored below 32°F (0°C) or above 122°F (50°C).
Important:
•UseonlywithGLUCOCARD™01-minibloodglucosemeterand 
GLUCOCARD™ 01-SENSOR blood glucose test strips.