Armstrong International
221 Armstrong Blvd, Three Rivers, MI 49093 - U.S.A.
Tel: (269) 279-3602 Fax: (269) 279-3130
Designs, materials, weights, and performance ratings are
approximate and are subject to change without notice.
Visit armstronginternational.com for the most updated information.
Page 1 of 36
Introduction
Congratulations on selecting the Emech
®
product from Armstrong. Armstrong devotes considerable care and attention to the design of its
products. To obtain the best performance from your Emech
®
product, this manual should be carefully read from cover to cover. It contains
important installation, operation, and maintenance instructions.
The customer must strictly adhere to the safety tips, troubleshooting advice, cautions, and warnings that are listed in this manual. Along
with the warnings, instructions, and procedures outlined in this manual, the customer should also observe such other procedures generally
applicable to similar equipment.
If the customer does not follow these and other such warnings, instructions and procedures, the product may not perform as expected.
More seriously, failing to follow these instructions and warnings may cause property damage, personal injury, production down-time, and
other losses.
The customer should train its employees and contractors in the safe use of Armstrong products in relation to the customer’s specific
application. If the customer does not understand something in any part of this manual, contact Armstrong or its your authorized Armstrong
sales representative.
Safety
If instructions in this manual are not followed:
Icon Legend
!
Injury or death and property damage are imminent.
!
Injury or death and property damage are possible.
!
Potential property damage, expensive repairs, and/or voiding the warranty may result.
!
• Applicable codes must be followed and supersede any other instructions. Generally applicable
codes in the US include:
• IPC (International Plumbing Code)
• Read this manual
• Improper installation or operation may cause a flood resulting in property damage, personal
injury, or death. Armstrong strongly recommends a qualified professional to install this product.
• Service must be performed by a qualified professional.
• Improper installation, start-up, operation, maintenance, or service may void the warranty.
Hot water or metal may cause scald burns. Skin exposure to 140°F (60°C) water or metal for only five
seconds may cause a second-degree burn.
To Next Page
Loading...
Need help?
General
