Armstrong International
221 Armstrong Blvd, Three Rivers, MI 49093 - U.S.A.
Tel: (269) 279-3602 Fax: (269) 279-3130
Designs, materials, weights, and performance ratings are
approximate and are subject to change without notice.
Visit armstronginternational.com for the most updated information.
Page 3 of 36
Parts and Materials
# G22 and G23 Details Materials of Construction
1 Padlock holes for manual override N/A
2 Body top Powder coated aluminum
3 Drive enclosure (extrusion) Powder coated aluminum
4 Body base Powder coated aluminum
5 Nameplate 316 stainless steel
6 Mounting bracket (Fits ISO5211 F05 & F07 size) 316 stainless steel
7 Electronics enclosure Powder coated aluminum
8 Sealed plug (for factory encoder adjustment) Nickel plated brass
9 Fixings and spring washers Stainless steel
10 Plug ½ NPT cable entry Plastic
11 Temperature sensor input Nickel plated brass
12 Pressure relief vent 316 stainless steel
13 Manual override handle 316 stainless steel / Acetyl
14 Keypad label Polycarbonate
15 Drive coupling 316 stainless steel
16 2-piece slotted coupling 316 stainless steel
17 Fixings and spring washers Stainless steel
1
2
3
4
5
6
7
8
9
10
1112
13
15
14
Note: Standard mounting kits are included
with all Emech
®
Mixing Systems.
The two couplings (Item 16), fixings, and
spring washers (Item 17) are not included
when ordering an Emech
®
Actuator only.
These two items must be ordered separately.
16
17
To Next Page
Loading...
Need help?
General
