DIS-IP2 DESKTOP CALL STATION
USER MANUAL
page 2/37 armtel.com
© Armtel info@armtel.com
SAFETY PROVISIONS
During installation and operation of DIS-IP2, observe the safety measures specified
by local regulations on electrical safety.
In order to ensure fire safety, follow the following rules:
− before connecting the product to the power supply, make sure the power and
communication cables are properly insulated;
− protect power and communication cables from damage.
To avoid electric shock, do not:
− operate the product with damaged power and / or communication cables.
ATTENTION! IT IS FORBIDDEN TO CONNECT THE EXTERNAL 48 VOLT POWER SUPPLY
TO THE 12 VOLT SOCKET, AS THIS WILL LEAD TO THE DIS-IP2 OUT OF SERVICE!
It is strictly forbidden to disassemble the product connected to an Ethernet network
or to an external power adapter.
Do not use the product in rooms with high humidity of more than 80% or conductive
dust.
The safety provisions for specific operations described in this manual are marked
with:
To Next Page
Loading...