ARRI SkyPanel User Manual

Fixture Menu
41
Fixture Settings
Fixture Status
System Ready No error
<Error Message> Error message (see page 46)
Light Engine Temp.
xx.x °C
xx.x °F
Recent light engine temperature
Hour Counter
xxh - Light Engine
yyh - System
Working hours of the light engines and of the system.
Battery Voltage x.y V Recent voltage of an external battery
IP Settings
DHCP Use DHCP mode
Art-Net 2.B.C.D Use Art-Net net 2.B.C.D
Art-Net 10.B.C.D Use Art-Net net 10.B.C.D
Manual Set network address manual (see page 36)
IP Address A.B.C.D. The fixtures IP address
MAC Address u:v:w:x:y:z The fixtures MAC address
Network Name Sxx-xxxxxxx-xxx The fixtures network name (ident and serial number)
Fixture Serial No. L1.xxxxxxx-xxx The fixtures serial number
Firmware Version x.xx.xx.xxxx The fixtures firmware version
Display Version x.xx.xx.xxxx The displays firmware version
USB Mode
Normal USB port powered
Service
USB port not powered. Do not change this setting
unless being asked by ARRI service. Risk of
damage!
Factory Reset
No Abort action
Yes Load factory settings
Level 1 Level 2 Level 3 Level 4 Explanation (default setting = bold)

ARRI SkyPanel Specifications

General

Type	LED Soft Light
Color Temperature	2800K - 10000K
CRI	≥ 95
Dimming	0 - 100%
Control	DMX, Ethernet
Input Voltage	100-240V AC, 50/60Hz