Arris Touchstone DG2470 - Resetting the Router to Factory Defaults

Chapter 6: Using the Data Gateway
1. Reset button
2. Ethernet (1 - 4)
3. Cable
4. Power
Resetting the Router to Factory Defaults
To reset the router to factory defaults, press and hold the Reset button (1) on the back of
the Data Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Release 24 STANDARD 1.3 February 2015 Touchstone DG2470 Data Gateway User Guide 32