Arris Touchstone TG4482 - Chapter 5: Operate the Telephony Gateway; Set up Your Computer to Use the Telephony Gateway; Indicator Light for the TG4492; LED Patterns

Chapter 5
Operate the Telephony Gateway
This chapter describes the controls and features available on the Telephony Gateway, and
covers basic troubleshooting procedures.
■
Set up your computer to use the Telephony Gateway (page 26)
■
Indicator lights for the TG4492
■
Use the Reset button
■
Reset the Telephony Gateway to factory defaults
Set up your computer to use the Telephony
Gateway
Follow the instructions in the information packet supplied by your service provider. Contact
your service provider if you need help setting up your computer.
Indicator light for the TG4492
The Telephony Gateway has an LED indicator light to assist in troubleshooting.
1. Status LED: Indicates the device power and status.
LED patterns
Touchstone TG4482 Telephony Gateway User Guide DRAFT Revision 1.3 26