Arturia Keystep - Sustain Message CC; Mod Strip MIDI Ch; Mod Strip CC; Pitch Bend MIDI Ch

ARTURIA – KeyStep – USER’S MANUAL 63
10.9.2.11 Sustain Message CC
Ordinarily a sustain pedal is assigned to MIDI CC #64. But this parameter allows you to
set it to a different MIDI CC number so you can use it as another modulation source.
10.9.2.12 Mod strip MIDI Ch
This determines whether the Mod strip will send its messages down a fixed MIDI Channel
at all times or change MIDI Channels when the keyboard does.
10.9.2.13 Mod strip CC
Ordinarily a mod wheel is assigned to MIDI CC #1. But this parameter allows you to set
it to a different MIDI CC number so you can use it as an alternate modulation source.
10.9.2.14 Pitch Bend MIDI Ch
This determines whether the Pitch strip will send its messages down a fixed MIDI
Channel at all times or change MIDI Channels when the keyboard does.
10.9.2.15 Velocity curve
Three velocity curves are available so you can choose the one that best matches your
playing style.
10.9.2.16 Aftertouch curve
Three aftertouch curves are provided so you can choose the one that seems the most
responsive to you.