Table 3: Safety and regulatory information for all 2930F switch models
Safety-EU
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:A2:2013
Safety-Worldwide
IEC60950-1:2005 Ed.2; Am 1:2009+A2:2013
Safety-North American
UL60950-1, CSA 22.2 No. 60950-1
Lasers EN60850-1:2007 / IEC 60825-1:2007 Class 1
Class 1 Laser Products / Laser Klasse 1
EMC EN55032:2012 Class A, EN 55024:2010, EN61000-3-2:2014, EN 61000-3-3:2013;
FCC CFR 47 Part 15:2010, Class A
RoHS EN 50581:2012
NOTE: Environmental and other switch specifications, such as acoustics data, are included in the Aruba
2930F Switch Series Installation and Getting Started Guide.
IMPORTANT: Use only supported Aruba SFP transceivers with your switch. For more on transceivers, see
the latest edition of the ArubaOS-Switch and ArubaOS-CX Transceiver Guide.
When selecting a fiber SFP device, make sure it can function at a temperature that is not less than the
recommended maximum operational temperature of the product. Use only an approved Laser Class 1 SFP
transceiver.
Japan Power Cord Warning
China altitude warning
Brazil statement
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua
aterramento (três pinos), conforme a Norma NBR ABNT 5410, visando a segurança dos usuários contra choques
elétricos.)
Page 5
To Next Page
Loading...
Need help?
General
