Aruba Mobility Master - Specifications, Safety, and Compliance; Mobility Master Hardware Appliance Specifications; Regulatory Model Name; Safety and Regulatory Compliance

Aruba Mobility Master Hardware Appliance | Installation Guide Specifications, Safety, and Compliance | 23
Chapter 3
Specifications, Safety, and
Compliance
Mobility Master Hardware Appliance Specifications
Physical
 Device Dimensions (without mounting brackets) (HxWxD): 1.73” x 17.40” x 15.79” (4.4 cm x 44.2 cm
x 40.1 cm)
 Device Weight: 15.87 lbs (7.2 kg)
Power Supply Specifications
 400W AC Power Supply
 AC Input Voltage: 100 VAC to 240 VAC
 AC Input Current: 6.0 A max
 AC Input Frequency: 50 to 60 Hz
Operating Specifications
 Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
 Operating Humidity Range: 10% to 90% (RH), non-condensing
Storage Specifications
 Storage Temperature Range: –40 °C to 70 °C (-40 °F to 158 °F)
 Storage Humidity Range: 10% to 95% (RH), non-condensing
Operating Altitude
 Operating Altitude Range: 0 to 10,000 feet
Regulatory Model Name
The regulatory model name for the Mobility Master hardware appliance is ARCNMMHW.
Safety and Regulatory Compliance
Aruba Networks, Inc. provides a multi-language document that contains country-specific restrictions
and additional safety and regulatory information for all Aruba products. This document can be
viewed or downloaded from the following location: www.arubanetworks.com/safety_addendum
Aruba appliances must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.