Arylic A30+ - Add; Remove Device to Multiroom

14
In order to add device to multiroom function, click on the “+” mark of the device you want to be the master device.
A list of available devices will pop out and you can select the device you want to add as slave device. Click the Done
button when nished.
The gray tick icon represents the master device and green tick icon represent the slave device.
To remove device from multiroom function, click on the “+” mark again to bring up the device list, and unselect any slave
device you want to remove. Then click on the Done button to conrm.
If all the slave device is removed, multiroom function will disable.
8.5.1 Add / Remove Device to Multiroom