11
7.1 Bluetooth Receiver Mode
When in Bluetooth receiver mode, the BT LED will be flashing which indicates it is waiting for
connection. In your BT transmitter device (mobile phone, pad, TV) you can search for a Bluetooth device
name “BP50 XXXX” (XXXX is the serial number) and connect to it.
Once connected, the BT LED will stay on which indicates the connection is successful and you can
start playing music from the connected device and hear the sound coming out of the connected output
device.
The device will remember connected devices, it will auto connect to paired device.
7. Usage
You can connect up to 2 devices at the same time, once the rst device has been connected, press the
Reset button on the back of the device or press the BT button on the remote controller to enter pairing
mode for the second device. The connection process is the same as the rst device.
Please note, only one device can play music at a time, only when the current playing device stop music
playback, can the other device start streaming music.
To disconnect the Bluetooth connection, quickly press the Reset button twice to disconnect all the
connection.