14
7.5 Optical in Mode
You can connect any device with digital optical output to BP50. You can press the Mode button on the
device, use the remote controller or in the Go Control APP to switch to Optical in mode. The OPT LED
will turn on when you in Optical in mode.
You can also stream Optical in audio through Bluetooth and listen from connected Bluetooth receiver
devices such as Bluetooth speakers or Bluetooth headphone.
7.4 Phono in Mode
B5P0 is also a turntable amplier, you can connect your turntable to the Phono in connectors and the
GND connector to play music. Press the Mode button on the device, use the remote controller or in the
Go Control APP to switch to Phono in mode. The Phono LED will turn on when you in Phono in mode.
You can also stream turntable audio through Bluetooth and listen from connected Bluetooth receiver
devices such as Bluetooth speakers or Bluetooth headphone.
Please note, compare to Line in mode, Phono in mode has a very high amplication due to the low
volume of turntable. Do not connect any analog device line out to Phono in, it will create a very loud
voice and risk of damaging the device and connected speakers.
To Next Page
Loading...
Need help?
General
