EasyManua.ls Logo

Arylic S10+ - Connection; First Time Usage & BLE Wifi Setup

Arylic S10+
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
8.2 Connection
8.2.1 First Time Usage & BLE WiFi Setup
There is another way to setup WiFi if the above
method has failed:
1. Plug in the power cable.
2. The LED light will start ashing, wait till the LED ash
slowly.
3. Make sure your mobile has connected to your home
network using 2.4G and your GPS and Bluetooth is on.
4. Open 4Stream APP, for Android device, the system will
ask for permission to use GPS data & File storage, please
click accept to continue. This GPS permission is setup by
Google for BLE usage, once setup is nish you can go to
system settings and disable it, le storage permission is to
let 4Stream access your mp3 les store in your mobile.
5. 4Stream APP will list out all the device available for
setup, choose the one you want.
6. 4Stream APP will then ask you to choose the network
you want the device to connect to, choose the one you
want to connect.
7. Now enter password for your network, if this is not the
network you want the device to connect, you can change it
to the desire one.
8. Once connection is nished, it will automatically check
for new updates.
9. Then you can change the name of the device. You can
select a preset one or enter your own.
10. After you dene the name of the device, you will see it
APP ears in the device list in 4Stream APP and now you
can start streaming music.
1. Plug in the power cable.
2. The LED light will start ashing, wait till the LED ash
slowly.
3. Goto your mobile WiFi settings and search for
SoundSystem_xxxx WiFi and connect.
4. Open 4Stream APP and you should see the
SoundSystem_xxxx list in the device list.
*Your mobile might ask if you want to stay using this WiFi
connection, click yes.
6. Click on the "+" icon on the top right corner to add
device. The APP will prompt you to select the router
SSID you want your Up2stream device connect to (Enter
password if required) and select continue.
7. Once connected, you can change the name of the
device. You can select a preset one or enter your own.
8. After you dene the name of the device, you will see it
APP ears in the device list in 4Stream APP and now you
can start streaming music.
* Attention for Android users Di󰀨erent brand mobile
phones may ask you to allow to use Sound System
WiFi network, please choose yes, if not, you may
not able to set up successfully.
It may also ask you to authorize other things, please
choose yes or it may a󰀨ect your use.
* If you change to another router, or the password of the
connected router has been changed, please long press
"Play/Pause" button in WiFi mode to reset the connection.

Related product manuals