TD 93120EN
10 Oct 2016 / Ver. A
Configuration Manual
Ascom d43 DECT Handset
14
4. Maintenance
5 The frequency band option is no longer available.
NOTE: The selection is persistent and remains even after a factory reset.
4.7.1 Multiple Frequency Support
The handset can be used in a system that changes frequency by selecting "Multifrequency"
as frequency band in the handset. See 4.7 DECT Frequency Band Configuration. This setting
is applicable when handsets are used in different geographical locations, for example, users
working on ships that visit different countries.
When the frequency band is set to "Multifrequency" and the handset is restarted, it adopts
the frequency band (EU, US or Brazil) used in that particular region.
NOTE: The handset adopts the frequency band configured in the DECT system.
The recommended procedure when changing frequency band is as follows:
1 The site administrator transmits a broadcast message to all handsets informing them
that they need to be restarted at a specific time.
2 The site administrator enters IP-DECT master and changes the frequency setting and
carriers just before the specified time.
3 The users all restart their handsets. After the restart the handsets change to the
applicable frequency band or the default ’EU, US or Brazil’.
After the restart the handsets have changed to the applicable frequency band (EU, US or
Brazil).
To Next Page
Loading...
Need help?
General
