99
1. From the navigation panel, go to Advanced > QoS > Airtime Fairness.
2. Enable ATF: Enable or disable. ATF require primarily focuses on scheduling
fairness for transmission of traffic from Access Point (AP), and efficient Wi-Fi
bandwidth utilization.
3. Frequency: In the frequency field, select the frequency band that you want to use
for the ATF settings.
4. ATF mode: Airtime Fairness implements 2 scheduling algorithms: strict-queue
and fair-queue algorithm, which are mutually exclusive. Strict-queue algorithm
follows strict airtime allocation as configured by the user and does not try and
utilize any unused bandwidth. Fair-queue algorithm guarantees the configured
airtime in congested environments and it also utilizes any unused bandwidth.
5. SSID: Set the SSID which will be controlled by ATF.
6. Percentage of Air Time: Set the percentage of SSID which will be used for ATF
control.
7. MAC: Select client by MAC address and set the percent which will be used for
ATF control.
8. Click Apply
To Next Page
Loading...
