91
2.4.3.3 IPv6 Firewall
2.4.3.3.1 Common
Steps to set up common IPv6 Firewall:
1. From the navigation panel, go to Advanced > Security >IPv6 Firewall >
Common.
2. Enable Firewall: Disabling the firewall will deactivate all related functions.
3. Respond to Ping Request from WAN: This feature allows router to make a
response to ping request from WAN.
4. Enable MLD: Check [Yes] to allow MLD packages to be transferred to the router.
Check [No] to deny MLD packages.
5. Click Apply.
To Next Page
Loading...
