24
5. If you select PPTP:
• Username: This field is only available when you set the WAN Connection
Type as PPPoE, PPTP or L2TP.
• Password: This field is only available when you set WAN Connection Type
as PPPoE, PPTP or L2TP.
• Get the WAN IP Automatically: Select Yes to get WAN IP automatically
and No to enter IP manually below.
• IP: If WAN connection requires a static IP address, key in the IP address in
this field.
• Subnet Mask: If WAN connection requires a static IP address, key in the
subnet mask in this field.
• Gateway: If WAN connection requires a static IP address, key in the gateway
IP address in this field.
• Click Apply.
To Next Page
Loading...
