52
Server. This field only contains alphanumeric characters and dash symbols.
4. IP Pool Starting Address: Starting address that can be allocated to lan-side
devices.
5. IP Pool Ending Address: Ending address that can be allocated to lan-side
devices.
6. Lease Time: Defines the time that lan-side devices can use the assigned IP
address. When the lease time expires, the network client will either send renew or
rebind message to a DHCP server.
7. Default Gateway: IP address of the gateway for LAN.
8. DNS Server: IP address of a DNS server. DNS Server is used to resolve a DNS
into a numerical IP Address. By default, the router will act as a DNS server.
9. WINS Server: Windows Internet Naming Service manages interactions of each
PC with the Internet. If you use a WINS server, enter the IP Address of server
here.
10. Enable Manual: Assign fixed IP address for clients.
11. MAC: MAC address of lan-side device.
12. IP: IP address within DHCP IP Pool for an-side device.
13. Add/Delete: Add/Delete static IP.
14. Click Apply.
NOTES:
• We recommend that administrator use an IP address format of 192.168.1.xxx (where
xxx can be any number between 2 and 254) when specifying an IP address range.
• An IP Pool Starting Address should not be greater than the IP Pool Ending Address.
To Next Page
Loading...
