16
9
14 Transfer the hinge to the
other side. The hinge
must be mirror-inverted
and the hinge pin must be
unscrewed and refitted
on the other side of the
hinge.
Make sure that the hinge
pin is tightened fi rmly.
Transfer the door handle
15 Transfer the handle (9) to the other
side.
Fit the cover plugs for the old holes
by hand. Cover plugs are supplied
in the assembly kit.
Raise the cabinet
16 Raise the cabinet and place it in
position and secure the cabinet
to the wall.
Lower hinge mirror-
inverted
Door handle
_____________________________
NB
Wait at least 1 hour before using the
cabinet again. This is to allow time for the
oil in the compressor to flow back. The
compressor may otherwise be damaged.
____________________________________
_____________________________
CAUTION
The drying cabinet must not be used
without being secured to a wall owing to
the risk of tipping over forward.
____________________________________
To Next Page
Loading...
